1000W 36V-72cells or 60cells-30V Grid tie inverter 20-45VDC to AC90V-140V or 190V-260V MPPT solar wind power on grid inverter

  • 1000W 36V-72cells or 60cells-30V Grid tie inverter  20-45VDC to AC90V-140V or 190V-260V MPPT solar wind power on grid inverter

1000W 36V-72cells or 60cells-30V Grid tie micro inverter

20-45VDC to AC90V-140V or 190V-260V

MPPT solar wind power on grid inverter 1000W-1200W




Technical Parameters Table





Main System Function

1. AC 0 angle with high precision auto-detection:
AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.


2. Directly connected to the solar panels (do not need to connect the battery): 
Using precise MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output power,simply connect the solar panel to the grid inverters. Do not need to connect the battery. 


3. Synchronous High-frequency Modulation:
In the process of the grid, usually adapt the same phase angle in parallel. (ie, When the two-phase alternating current total is equal to 0.Use switch to combination the two AC fusion) and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation.


4. Pure Sine Wave Output:
Use SPWM directly to make pure sine wave output.


5. Automatic Sensing Function Solar Luminosity:
Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different illuminance and the data can be directly displayed on the LCD. Then you can visually see the sense of the strength of the sun unit. Used more convenient.


6. Power Automatically Locked (APL):
In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable.


7. Maximum Power Point Tracking (MPPT):
Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision MPPT operation power, automatic and immediate adjust the solar panels output power at the  maximum output point, then achieve a stable output purposes.


8. Automatically Adapt To Different Load Power Factor:
Adapt to any of the power load.


9. Constant Current, Constant Power:
This product is constant current, constant output power, without any overload, over-current phenomenon.


10. Automatically Shut Down When The Power Output Of a Fault:
When the city power system is in failure, the inverter will automatically turn off the output.


11. Current Limit Protection:
Current limit.


12. Stack Multiple Machines:
Multiple small power inverters in parallel can achieve large output power. 


13. High-Frequency High Conversion Rate:
Adapt high frequency converter, the output more efficient.



Photo Gallery

DC side .jpgAC side .jpg



Wide Application


1. 20-45VDC Input (Vmp: 26-39V,Voc: 34-46V), work with 24V/30V-60cells or 36V-72cells solar panel. 

       10.5-28VDC Input (Vmp:18-21V,Voc:20-24V), work with 18V-36cells solar panel;

2. Work with wind turbine, but a 24V or 36V charge controller needed to be used if the wind turbine without build-in charge controller.

3. Work with 24V battery, solar and wind turbine charging the battery and battery discharging to inverter for energy Conversion.





Design Standards

1. Chinese "safe standard GF 004" "grid standard GF004" "electromagnetic compatibility standards GB/T 17626";


2. American "safety standard UL 1741" "grid standard IEEE 1547" "Electromagnetic Compatibility FCC Pt.15";


3. German "safety standard EN 62109-1/-2" "grid standard VDE 4105" "EMC standards EN 61000-6-X".












Write a review

Note: HTML is not translated!
    Bad           Good
  • Product Code: 1701970675
  • Availability: In Stock
  • $169.00
  • $143.65

  • Ex Tax: $143.65